Upcoming Events

Live SOLIDWORKS, and SOLIDWORKS Partner Product Events in your City & Online

If you are interested in learning how SOLIDWORKS or Stratasys 3D Printers can help your business then please plan to attend one of Javelin's upcoming online webinars listed below, with additional information provided further down the page. 

 

All Online Webinars
Webinar Type Topic Date Start & End Time Register
SOLIDWORKS PDM Introduction to PDM Administration Training Thursday, December 15, 2016 1:00 PM - 2:00 PM (EST) Register
SOLIDWORKS PDM PDM Administration Refresher Training Thursday, December 15, 2016 2:00 PM – 3:00 PM (EST) Register
SOLIDWORKS 2017 SOLIDWORKS 2017 Large Assemblies Wednesday, February 22, 2017 2:00 PM – 3:00 PM (EST) Register
SOLIDWORKS Partner Product Webinars

Automate SOLIDWORKS Design Tasks with DriveWorks

Featured Product: DriveWorks

Duration: 60 Minutes

Description: DriveWorks is used by designers all over the world to automate everyday repetitive design tasks. DriveWorksXpress, which is included in each license of SOLIDWORKS, can be used to create multiple variations of SOLIDWORKS Parts, Assemblies and Drawings quickly and accurately. 

Join us for this webinar to learn how you can save time, automate repetitive tasks and minimise costly errors. You will also learn how DriveWorks can be used as an Online Product Configurator to increase sales and improve competitiveness.

 

Webinar Date Start & End Time Register
Thursday, November 3, 2016 11:00 AM – 11:30 AM (EDT) Register
SOLIDWORKS Simulation Webinars

Simulating Large Assemblies

Featured Product: SOLIDWORKS Simulation

Duration: 30 Minutes

Description: In this webinar we’ll look at the challenging topic of Large Assembly analysis. Large assemblies can be tricky to simulate, but with some tips and tricks for setup, you’ll be successful with your large simulations.

  • Simplification – what to simplify, and how to simplify
  • Setup techniques for large assemblies
  • Meshing large assemblies
  • Solving for large assemblies
Webinar Date Start & End Time Location Register
Wednesday, September 07, 2016 1:00 PM – 1:30 PM (EDT) Online Register
SOLIDWORKS PDM Webinars

Introduction to PDM Administration Training

Featured Products: SOLIDWORKS PDM 2017

Duration: 60 Minutes

Description: In this webinar we will cover the basics of SOLIDWORKS PDM administration. You will learn the basics of how to create new variables, data cards, users, groups, workflows and searches. You will also learn about the fundamentals of process oriented revision control. There will be approximately 45 minutes of planned content and plenty of time to handle Q&A on topics of your choice. Please join us to build your skills on PDM Administration.

 

Webinar Date Start & End Time Register
Thursday, December 15, 2016 1:00 PM - 2:00 PM (EST) Register

PDM Administration Refresher Training

Featured Products: SOLIDWORKS PDM 2017

Duration: 60 Minutes

Description: In this webinar we will review some of the basics of SOLIDWORKS PDM administration but will show a number of examples of more advanced PDM administration. Some of the basics will include a brief refresher on how to create new variables, data cards, users, groups, and searches. The advanced topics will focus on advanced workflow automation and template creation. There will be approximately 45 minutes of planned content and plenty of time to handle Q&A on topics of your choice. Please join us to build your skills on PDM Administration.

 

Webinar Date Start & End Time Register
Thursday, December 15, 2016 2:00 PM – 3:00 PM (EST) Register
Electrical Webinars

Electro-Mechanical Solution with SOLIDWORKS Eco System

Featured Product: SOLIDWORKS Electrical, SOLIDWORKS PCB, SOLIDWORKS Premium

Duration: 30 Minutes

Description: Join us on Thursday September 8th for the conclusion of our 3 part SOLIDWORKS PCB webinar series! This webinar will include the following topics:

  1. Improve Product Development Cycle with information sharing/utilization
  2. Leverage SOLIDWORKS Electrical, SOLIDWORKS PCB and SOLIDWORKS Mechanical for a complete product design
  3. Challenges and Successes
Webinar Date Start & End Time Location Register
Thursday, September 08, 2016 12:00 PM – 12:30 PM (EDT) Online Register
ExactFlat Webinars

Thermal Insulation Cover Design With ExactFlat

Featured Product: ExactFlat

Duration: 45 Minutes

Description: Javelin Technologies would like to invite you to see how you can increase your productivity by as much as 50% when designing Thermal Insulation Covers/Acoustic Insulation Covers for the: 

  • Petrochemical 
  • Power Generation 
  • Mining 
  • Marine 
  • Aerospace 
  • Defence 
  • On/Off Road Commercial Vehicle 

Join our 45 minute webinar to see firsthand how you can: 

  • Easily create complex geometry fast 
  • Flatten virtually any shape accurately 
  • Quickly add: 
  • Seams 
  • Hems 
  • Notches 
  • Hardware 
  • Markings 
  • Pattern/Nest the pieces
  • Calculate Costs automatically 
  • Document the process for the shop floor 

Find out how your competitors are leveraging this technology to get their patterns right the first time! Don’t get left behind trying to make your pieces fit on the 2nd and 3rd try. 

 

Webinar Date Start & End Time Location Register
Friday, September 9, 2016 12:00 PM – 12:45 PM (EDT) Online Register
3D Printing Webinars

Improving the Delivery of Healthcare with 3D Printing

Duration: 30 Minutes

Description: Join Guest Speaker Michael Gaisford, Director of Marketing for Stratasys Medical Solutions, as he presents this informative webinar about 3D printing in the medical industry. 

During this webinar we will cover medical applications for 3D printing in a hospital environment, including: 

  • Surgical planning models to improve clinical outcomes and operating efficiency 
  • Education and training models to enhance physician skills 
  • Custom tools, jigs, and fixtures for research and operating efficiency
  • Rapid prototyping to enable hospital innovation 

Meet the speaker:

Michael Gaisford is the Director of Marketing for Stratasys Medical Solutions. In this role, he oversees global marketing programs, collaborations with physicians and hospitals and medical application development. Michael brings over a decade of medical device and pharmaceutical industry experience, including roles in marketing and strategy with Boston Scientific, as a consultant with Health Advances, a boutique healthcare consulting firm, marketing at Genentech and as a Strategy Associate at CVS/Pharmacy. He holds an M.B.A. from the Tuck School of Business at Dartmouth and a B.S. in Industrial Engineering from Stanford University.

 

Webinar Date Start & End Time Register
Tuesday, November 15, 2016 3:00 PM – 3:30 PM (EDT) Register
Pool Pattern Pro Webinar

Pool Pattern Pro

Duration: 45 Minutes

Description: Pool Pattern Pro software automates the design and development of vinyl pools and covers to reduce the time and costs required to go from design to the cutting table. Within 30—60 days of implementation, Pool liner and cover manufactures typically see a 30—50% increase in productivity and profitability.  Join us on Wednesday November 2nd at 2PM EDT as we unveil the latest enhancements in Pool Pattern Pro, allowing you to create liners and safety covers faster! 

 

Webinar Date Start & End Time Register
Wednesday, November 2, 2016  2:00 PM – 2:45 PM (EDT) Register