SOLIDWORKS Configurations and the ‘Save Bodies’ command

Article by Jamie Hill, CSWE, last updated on April 17, 2018

The “Save Bodies” command is a great feature for saving out all or some of the individual bodies of a multibody part to their own individual part files while keeping them parametrically linked to the original. I’ve seen this used for a multitude of reasons, one of the most common being because of company standards and file naming conventions. The other day I had a customer that created their multibody part, used the ‘Save Bodies’ to push out the individual files, then went back to the master model and created some configurations.

 

Because these files are parametrically linked, they were expecting the new configurations to automatically be pushed out to the individual part files. Unfortunately this is not the case, and so we have stumbled upon somewhat of a limitation with this command (please submit your Enhancement Requests!).

Weldment Configuration

Weldment Configuration

In order to have your configurations pushed to the individual part files, you MUST make your configurations BEFORE you use the ‘Save Bodies’ feature. This will push out your bodies and configurations without a problem.

Body Configuration

Body Configuration

Related Posts

Related content by tag:

Jamie Hill, CSWE

Jamie is a Certified SOLIDWORKS Expert working in the Javelin Oakville, Ontario, Canada office.

Want to learn SOLIDWORKS?

Take a training course from our team of Certified SOLIDWORKS Experts