SOLIDWORKS 2020 Launch Broadcast, on Tue, Oct 1 at 9:00 AM ET  REGISTER NOW ›

How to save a ScanTo3D (.3ds) file from a SOLIDWORKS part?

Article by Vipanjot Kaur, CSWP created/updated August 8, 2019

You must have the SOLIDWORKS ScanTo3D Add-in enabled before you can save parts as the ScanTo3D 3DS file format. There are a few ways for you to enable SOLIDWORKS add-ins as described in this blog article.

However, saving the part files directly as a ScanTo3D file format shows the warning message stating: “No available entities to process through 3DS.”

SOLIDWORKS Error Message

SOLIDWORKS Error Message

The problem is due to incompatible types of files. A .3ds file is a ‘mesh file’. It is not compatible directly with graphics, solids and surface bodies.

You must create a mesh file from the file to be exported and then save to .3ds file format.

Create a compatible Mesh file:

STEP 1:

Save SOLIDWORKS .STL file from a SOLIDWORKS part file through File > Save as > .STL

STEP 2:

Now open SOLIDWORKS .STL file in SOLIDWORKS using File > Open > select the file type as ScanTo3D Mesh (.STL).

Change file type to ScanTo3D 3DS when importing .STL

Change file type when importing .STL

STEP 3:

The file will then be in a mesh format and can then be exported directly to .3ds file format through File > Save as > Scanto3D Mesh Files

Posts related to 'How to save a ScanTo3D (.3ds) file from a SOLIDWORKS part?'

Find Related Content by TAG:

Vipanjot Kaur, CSWP

Vip is a Certified SOLIDWORKS Professional (CSWP) and is based in our Oakville Ontario head office.

Want to learn SOLIDWORKS?

Take a training course from our team of Certified SOLIDWORKS Experts