Entités et partenaires de l'esquisse

Article by Joe Medeiros, CSWE updated September 14, 2013


Note: The information contained in this article applies to SolidWorks 2013 and earlier versions. Next week we will show you how an extremely powerful new tool introduced by SolidWorks 2014 empowers users to replace sketch entities without breaking relations downstream.

After opening an assembly, mate errors are present, that were not present when the assembly was last saved.

erreurs d'accouplement

On troubleshooting the mate errors, it is evident that a mating face is missing.

missing face

Often the reason for the mate error is due to a sketch entity being deleted and possibly replaced. When a sketch is used to create an extrusion, each sketch entity will generate a face and this face will have a unique ID. If a sketch entity is deleted and replaced with another sketch entity, this will result in a new face with a new unique ID. In an assembly, mating faces are identified by this unique ID. If a change in a sketch results in a new face with a new ID, then this may result in mate errors if the old face face was referenced in a mate.

To avoid these errors, avoid deleting sketch entities when possible. If this is not possible and you believe that the changes may affect some mates, open the assembly and fix the mate errors. Mate errors can be difficult to troubleshoot; fixing them as they occur will make fixing them much easier. Some people avoid mating to faces altogether and instead mate to planes. Care should be taken not to reference a model face when creating a plane, as model changes may cause rebuild errors on the plane. If the assembly does not have any moving parts, using the mate option Use for positioning only may prevent mate errors even if the sketch geometry is changed.

mate options

This option will position the component, but will not apply any mates. When the component is correctly positioned using whatever “position mates” that are required, the component can be Fixed. This method would also increase performance, since there are no mates to process during rebuilds.

Trouver du contenu connexe par TAG :

Joe Medeiros, CSWE

Joe Medeiros est un expert certifié SOLIDWORKS et PDM. Il aide les utilisateurs de SOLIDWORKS en matière de formation, de mentorat et de mise en œuvre depuis 1998. Il associe son expérience de l'industrie à une connaissance approfondie des produits SOLIDWORKS pour aider ses clients à réussir. Il partage son expérience et son expertise par le biais de blogs, dont l'un a été intégré au manuel de formation SOLIDWORKS Essentials.