Améliorations de l'outil d'aplatissement des surfaces de SOLIDWORKS 2016 [VIDEO]

Article de Rod Mackay mis à jour le 26 septembre 2015

Article
SOLIDWORKS 2016 Flatten Surface Tool

SOLIDWORKS 2016 Flatten Surface Tool

The SOLIDWORKS Premium 2016 Flatten Surface Tool provides more control and more variations of surfaces that can be flattened. You can flatten any face, surface, or set of faces with internal geometries such as holes or extruded cuts. You can select curves and sketches on the surface to flatten. You can also select curves, sketches, and edges on the surface to be relief cuts or split lines. When you select these entities in the graphics area or the FeatureManager design tree, they display in the Flatten PropertyManager.

Check out the video below to see the SOLIDWORKS 2016 Flatten Surface Tool in action:

To flatten a surface:

  1. In an open part, click Flatten (Surfaces toolbar) or Insert > Surface > Flatten. The Flatten PropertyManager displays.
  2. Select faces in the graphics area or from the FeatureManager design tree.
  3. Then select a vertex. A preview of the flatten surface appears.
  4. You can also choose to include relief cuts or not. In the PropertyManager, click Relief Cuts. You can select curves or sketches as cuts to relieve stress in the flattened surface.
  5. You can transpose additional sketch entities, curves or lines to a flattened surface. However, you cannot modify the sketch in a flattened surface feature. To use the entities in other sketches, use the Convert Entities tool.
  6. To add a deformation plot, right-click the flattened surface in the graphics area and select Deformation Plot.

En savoir plus sur SOLIDWORKS 2016

Pour en savoir plus sur la dernière version de SOLIDWORKS, vous pouvez assister à une diffusion de lancement le jeudi 1er octobre ou le mardi 6 octobre. Veuillez consulter notre page d'inscription pour vous inscrire à un événement de diffusion.

S'inscrire à un événement de lancement

Liens connexes

Obtenez des services SOLIDWORKS certifiés de Javelin

Javelin Experts peut vous aider à :

Rod Mackay

Rod utilise des logiciels de CAO 3D depuis plus de 25 ans et a formé des milliers de concepteurs à une utilisation plus efficace de leurs systèmes de CAO. Rod est le webmestre de Javelin et est basé à Ottawa, ON, Canada.