holes

Using SOLIDWORKS Direct Modeling to modify an imported model without feature history [VIDEO]

Direct Modeling

How can you modify a model without history? Use the SOLIDWORKS direct modeling tools to reverse engineer an existing model. When you need to create tooling or fixtures for your customer parts, it is often necessary to remove all the details that will not be produced by your tooling, or features which are simply not required for modeling your fixture. This process becomes more complicated when the model you receive from your customer has been created with different CAD software. That means you will import only the geometry of the part, without the feature history that created it. Reverse engineer/model an imported part Trying to reverse engineer the part in order to discover how the model has been created is detective work. Less experienced SOLIDWORKS users will try to guess how the part looked early in the modeling process by adding or removing material, using features such as the Extrude-Boss or Extrude-Cut. This can be a very tedious process, with a…

Read More...

Using the Sketch Pattern to Simulate the Hole Series Behaviour at Part Level

The HOLE SERIES is a powerful time saver that enables the creation of different type of holes, parametrically linked together, on the components of an assembly. Imagine that you want to create counterbore holes in the top plate, clearance holes in the middle plates and tapped holes in the bottom plate. Of course, you need all these holes to be driven by one sketch; so, should you move, delete or add points in that sketch, all the holes would be influenced by that. If you work in assembly mode, good for you; the HOLE SERIES tool will do all of the above. But what can you do if you want to parametrically link various types of holes in a part model?   Watch this video…

Read More...

Want to become a SOLIDWORKS Expert?

Take a LIVE Online Training Course from Javelin