Creating a Honeycomb Pattern [VIDEO]

Article by Scott Durksen, CSWE updated November 12, 2012

Article

Ever need to create a honeycomb pattern of a feature?  Here is a technique using the Fill Pattern command.  If you only need the pattern in a specific area, use the Split Line command (Insert > Curve > Split Line) to create a smaller face for the fill selection.

Related Links

Certified SOLIDWORKS Services available from Javelin

Javelin can help you to:

Scott Durksen, CSWE

Scott is a SOLIDWORKS Elite Applications Engineer and is based in our Dartmouth, Nova Scotia office.