Javelin / TriMech Author
Paul Sesto
3D Printing Helps Students Create the Missing Piece
By Paul Sesto on March 8, 2017
For Jerry Grech, it’s all about helping students find the missing piece. Grech, who got his start in auto and space engineering, has been the machine shop coordinator for the past four years in the Faculty of Science at York University, Canada’s third largest university….
3D Printing in Schools – Health & Safety FAQ Continued
By Paul Sesto on January 23, 2017
Earlier this month we posted part two of our three-part blog series covering 3D Printing Health & Safety in schools. We will now answer the remaining FAQ that educators have about 3D printing. Health and safety (H&S) considerations and the successful implementation of 3D Printers are very…
Our MakerBot & Stratasys 3D Printers are a mainstay in education at all levels – elementary & high schools, colleges & universities and also public libraries. This past September we posted part one of our three-part blog series covering 3D Printing Health & Safety in schools. We…
3D Printing Do-It-Yourself: MakerBot Safety Shield
By Paul Sesto on December 6, 2016
3D Printing health & safety is top priority for Javelin. All of our Stratasys FDM 3D Printers are fully enclosed and have electromechanical latches so they cannot be opened during operation. MakerBot 3D Printers are engineered and tested for simple, safe, and reliable desktop 3D printing. One…
3D Printing in Schools – Introduction to Health and Safety
By Paul Sesto on September 15, 2016
As Javelin’s 3D Printing Education Specialist I am speaking on a daily basis with educators, professors, students and technicians at elementary schools, secondary schools, colleges and universities across Canada. For the last year and a half, I have also had the opportunity to discuss 3D printing with…
3D Printing in Schools – Turn Your Goals & Visions into Success
By Paul Sesto on July 28, 2016
The majority of schools and school boards who contact Javelin are new to 3D printing technology and are looking for our experience to help them get started. Our guidance, industry experience and technical support is something you cannot get from a big box outlet or by…
As Javelin’s 3D Printing Education Specialist, I regularly speak with Canadian teachers, educators, professors & technical staff from elementary schools, high schools, colleges and universities. What I truly enjoy about the education market is the willingness to share experiences and stories. Due to this information sharing between…
Javelin supplying 3D Printers to Ontario schools, universities, libraries & hospitals
By Paul Sesto on April 22, 2016
Javelin Technologies awarded 2 year Master Agreement with the Ontario Education Collaborative Marketplace* (OECM) to supply on an as-need basis 3D printer technology, services and training to Ontario’s public sector including school boards, colleges, universities, municipalities, libraries & hospitals. After a recent extensive competitive tender…
3D Printing at the Engineering World Health Symposium
By Paul Sesto on February 22, 2016
Javelin was proud to be one of the sponsors for the annual Engineering World Health Symposium – UofT Chapter held at the University of Toronto on February 22, 2016. EWH-UofT aims to motivate and mobilize the student community to improve health car in low- and…
Javelin Proudly Sponsored the Calgary Mini Maker Faire featuring 3D Printing
By Paul Sesto on October 5, 2015
The fifth annual Calgary Mini Maker Faire took place on the weekend of September 12-13, 2015 at Telus Spark – Calgary’s science centre (see http://www.makerfaireyyc.ca/) For those unfamiliar with Marker Faires, it is an event created by Make magazine to “celebrate arts, crafts, engineering, science…
If you an Educator looking for a 3D Printing solution then you can learn about the steps for implementing 3D printing in your courses to improve learning.
Javelin provides 3D Printer for Algonquin College’s New Construction Research Centre
By Paul Sesto on February 9, 2015
On January 30, 2015, college staff and faculty along with industry and government partners had the pleasure of attending the official opening of Algonquin College’s (Ottawa) Construction Research Centre. The new facilities are part of the Algonquin Centre for Construction Excellence and are designed to…