Simplifiez la conception de toute piscine complexe grâce au nouvel administrateur de modèles PoolWorks.

Article by Scott Ellery updated December 15, 2015

Article

If you are in the pool design industry and you manufacture pool liners and covers there is a good chance you have heard of or are using PoolWorks.   If you haven’t heard of PoolWorks then today is your lucky day, PoolWorks is innovative pool design software created by Javelin for the rapid creation of pool liners and covers at a fraction of the time of traditional methods.   PoolWorks utilizes the simple, easy to use toolset of SOLIDWORKS combined with industry leading surface flattening technology from ExactFlat to get an accurate and tight fitting liner or cover everytime.

How does PoolWorks help you to create complex Custom Pools?

While PoolWorks has always been able to create and flatten any pool geometry, no matter how complex, I would like to take some time to go over a great new enhancement to the PoolWorks software, the Template Administrator, which allows you to create your own highly complex pool liners and save them as templates for quick and easy re-use and creation.

The Template Administrator

Here we have a Figure 8 Pool with a Safety Ledge, let’s see how we can use the new Template Administrator to save it as a Template.

Pool Design - Figure 8 Pool with Safety Ledge

Figure 8 Piscine avec rebord de sécurité

 

First we need to start with a Dig Print or Perimeter Sketch of the pool, these can be sketched in SOLIDWORKS or can be dragged and dropped from your Custom Design Library in SOLIDWORKS

Dig Print for Figure 8 Pool Pool Design

Dig Print for Figure 8 Pool

The next step is to create all the Pool geometry, this may seem like a long process but the average time is around 3 – 4 minutes. When we are finished with the Geometry creation we can navigate to the PoolWorks tab , in SOLIDWORKS, and click the Template Administrator button,

Turning Pool Geometry into a Template

Turning Pool Geometry into a Template

Once the Template Administrator opens you will be prompted to name your pool and start adding driving dimensions that will control your template. You do this by clicking the dimensions that you want to be driving and clicking on the Add Selected Dimension, the software will then prompt you to name the dimension and add it to your template list. You can add Template Dimensions for the Pool and the Hopper as well.

Note : to view dimensions in the model window simply double click on the feature, in the feature tree, to which the dimension is attached

Add Driving Dimensions to your Template

Add Driving Dimensions to your Template

With the Template Administrator you also have the ability to customize the image that is shown when it comes time to add dimensions to the template. Simply click on the image holder, above your selected template dimensions, and the image will be opened in paint. You can edit the image to your liking and save it for use with the template, this is useful for indicating which dimensions are driving which part of your pool model. You can edit an image for both Pool dimension displays as well as Hopper dimension displays.

Edit Display Image

Edit Display Image

Creating a new Pool design with a template

You are now ready to use the template with PoolWorks, we can now start a new pool and select Use Template.

Create a new Pool

Create a new Pool

We can then navigate to the project tab and enter our Project Number, Select our project scope and enter or import out Custom Properties.

Enter Project Information

Enter Project Information

When we proceed to the Pool Data tab we see a brand new folder structure where we can select our new custom template

New Template Folder Structure

New Template Folder Structure

Once our Template is selected we can enter all the measurements using our guide image that we customized during the template setup.

Enter values for our Custom Template

Enter values for our Custom Template

All that is left now is to set our shrink factor and press Create Pool

Create the Custom Pool

Create the Custom Pool

The custom pool is then created in seconds and is ready for flattening.

Custom Template Created Pool

Custom Template Created Pool

Learn more about PoolWorks

The new PoolWorks Template Administrator makes complex pool design easy and drastically reduces the time from design to the cutting table.  If you would like to learn more about Poolworks, get pricing, or request a demonstration please visit our PoolWorks site.

Trouver un contenu connexe par TAG :

Scott Ellery, CSWE

Scott Ellery est un CSWE et un fervent contributeur à la communauté SOLIDWORKS. Il a été dix fois SOLIDWORKS World Presenter et contribue régulièrement aux réunions SWUG organisées par quatre groupes d'utilisateurs différents au Canada. Scott a travaillé avec de nombreux logiciels de CAO pendant plus d'une décennie dans une multitude d'industries différentes, notamment la fabrication d'acier, le moulage par injection et la tôlerie. Avec une formation en génie mécanique et en conception, Scott aime pousser SolidWorks à ses limites et apprendre aux utilisateurs à être aussi rapides et efficaces avec SolidWorks qu'il est humainement possible de l'être.