Bio-compatible (MED610)

PolyJet Transparent Material

MED610 is a transparent, bio-compatible PolyJet™ material medically approved for bodily contact.

The material is designed for both medical and dental applications and is approved for permanent skin
contact (more than 30 days) and limited mucosal membrane contact (up to 24 hours).

Bio-compatible (MED610) Material Properties

Behaviour and use

TENSILE STRENGTH

50-65 MPa

FLEXURAL STRENGTH

75-110 MPa

HDT

45-50°C

IZOD IMPACT, NOTCHED

20-30 J/m

Main Uses

Bio-compatible MED625FLX, MED610 and MED620 are ideal for medical and dental applications requiring precise visualization and patient contact. The materials are suitable for over 30 days skin contact and up to 24 hours mucosal membrane contact.

MED610 and MED620 are also appropriate for up to 24 hours bone/skin contact.

Top Applications
  • Dental Surgical Guides
  • Prototyping for medical and dental products

PolyJet Material Profile

Learn more about 3D printing PolyJet parts

See how Stratasys is empowering doctors, researchers and medical manufacturers to get products into clinical use faster, develop better therapies and to personalize care better than ever before with 3D printing solutions.

Watch the video to learn about the different applications for 3D printers in the medical industry.

Bio-compatible (MED610) Specification & Features

TestStandard
CytotoxicityEN ISO 10993-5:2009
IrritationEN ISO 10993-10:2013
Delayed-type hypersensitivityEN ISO 10993-10:2013
GenotoxicityEN ISO 10993-3:2014
Chemical characterizationEN ISO 10993-18:2009
USP Plastic Class VIUSP 34 <88>

 

PropertyStandard / ProcedureValue
Tensile StrengthD-638-0350 – 65 MPa (7,252 – 9,427 psi)
Elongation at BreakD-638-0510 – 25%
Modulus of ElasticityD-638-042,000 – 3,000 MPa (290.1 – 435.1 ksi)
Flexural StrengthD-790-0375 – 110 MPa (10,878 – 15,954 psi)
Flexural ModulusD-790-042,200 – 3,200 MPa (319.1 – 464.1 ksi)
HDT @ 0.45 MPaD-648-0645 – 50 °C (113 – 122 °F)
HDT @ 1.82 MPaD-648-0745 – 50 J/m (113 – 122 °F)
Izod Notched ImpactD-256-0620 – 30 (0.37 – 0.56 ft-lb/in)
Water AbsorptionD-570-98 24HR1.1 – 1.5%
Tg DMA E52 – 54 °C (126 – 130 °F)
Shore HardnessScale D83 – 86 D
Rockwell Hardness ScaleScale M73 – 76 M
Polymerized DensityASTM D7921.17 – 1.18 (g/cm3) (0.676 – 0.682 oz/in3)
BiocompatibilityprEN ISO 10993-1:2017Skin contact – permanent (>30 days)
Mucous membrane – short term (up to 24 hrs)
Sterilization Methods---Gamma sterilization using a dose of 25–50 kGy
Steam sterilization for four (4) minutes at 132 °C (270 °F) with fractionated pre-vacuum
Support Removal Type---WaterJet or soluble

 

System
Availability
Minimum Layer
Thickness Capability
Support
Structure
Available
Colours
Objet30 Prime16 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent
Objet30 Dental Prime™16 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent
Objet260 Dental™16 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent
Objet Eden260VS16 microns (0.0006 in.)SUP705 (WaterJet removable)Transparent
Objet Eden260VS Dental Advantage™16 microns (0.0006 in.)SUP705 (WaterJet removable)Transparent
Objet260/500™ Connex116 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent
Objet260/500 Dental Selection™16 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent
Objet260™ Connex316 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent
Objet350/500™ Connex316 microns (0.0006 in.)SUP705 (WaterJet removable)
SUP706 (soluble)
Transparent

PolyJet™ Technology

Advantages of 3D printing Bio-compatible (MED610) with a Stratasys PolyJet Machine

Proven Technology

Stratasys PolyJet 3D Printers are based on proven technology, which creates precise prototypes that set  the standard for finished-product realism. Their fine resolution makes complex shapes, intricate details  and smooth surfaces possible.

Advanced 3D Printing

PolyJet 3D Printing works by jetting layers of liquid photopolymer onto a build tray and instantly curing them with UV light. The fine layers build up to create a precise 3D model or prototype. Models are ready to handle right out of the 3D printer, with no post-curing needed.

Better ideas, easier sell

Stratasys PolyJet 3D Printers improve communication and collaboration because they produce amazingly  accurate representations of your ideas that you can share with your team and your clients for a faster, more confident buy-in.

Compatible 3D Printers

Stratasys Machines that can print with Bio-compatible (MED610) material

Need to 3D print with Bio-compatible (MED610)?

Call us free at  1-877-219-6757  to speak to an expert, or send us your CAD model and we'll 3D print it with Bio-compatible (MED610) material