Diran 410MF07

FDM Thermoplastic Filament

Diran™ 410MF07 is a nylon-based thermoplastic FDM® material, mineral-filled 7% by weight. It demonstrates very good toughness and impact strength combined with resistance to hydrocarbon-based chemicals. Its smooth, lubricious surface quality offers low sliding resistance.

Typical applications include jigs, fixtures and other forms of general manufacturing tooling, and is particularly effective for applications needing a non-marring interface between the tool and the work piece.

Diran 410MF07 Material Properties

Behaviour and use


40 MPa (XZ Axis)
30 MPa (ZX Axis)


1689 MPa (XZ Axis)
1448 MPa (ZX Axis)

HDT @ 66 PSI

90 °C


380 J/m (XZ Axis)
27 J/m (ZX Axis)

Main Uses

Diran is a nylon-based material specifically formulated for the production of jigs, fixtures, manufacturing aids, etc.

The material exhibits good mechanical properties and toughness – flexible, but strong.

Also, it has high lubricity (i.e. low surface friction) which is good for wear resistance and low scratch and mar characteristics limiting damage when in contact with sensitive components.

Top Applications
  • To reduce weight, lead time and cost in the production of manufacturing aids without the risk of marking your product.
  • Enhanced durability, strength and wear properties over existing solutions.
  • The ability to consolidate parts and improve tooling functionality and ergonomics.

FDM Materials Profile

Learn more about 3D printing FDM parts

Take a closer look at some of Stratasys’ most popular and versatile FDM materials along with six useful tips and tricks for getting the best results from each.

The materials covered in this video span from standard plastics (ABS-M30 and ASA) to engineering (Nylon 12) and high performance plastics (ULTEM 9085 and ULTEM 1010).

FDM Material Applications

Learn how designers and engineers are using FDM Materials

Material Attributes

Diran 410MF07

Mechanical Properties

Tough and strong


High Lubricity

Limit damage to sensitive components

Wear Resistant

Simple Post-processing

Break-away support material; save time in post processing

Ease of Use


Ideal for complex, ergonomic, and lightweight designs.

Design Freedom

Diran 410MF07 Specification & Features

Property    Test Method Typical Values XY Typical Values XZ/ZX
HDT @ 66psi ASTM D648
Method B
90 °C (194 °F) 90 °C (194 °F)
HDT @ 264psi ASTM D648
Method B
70 °C (158 °F) 70 °C (158 °F)
Tg ASTM D7426
Inflection Point
117 °C (243 °F) 117 °C (243 °F)
Mean CTE ASTM E831
(40 °C to 140 °C)
55 μm/[m·°C]
(31 μin/[in·°F]) 
113 μm/[m·°C]
(63 μin/[in·°F])
Volume Resistivity  ASTM D257  > 1.5*1015 Ω·cm  > 1.5*1015 Ω·cm
Dielectric Constant ASTM D150
1 kHz test condition
3.58 3.73
Dielectric Constant ASTM D150
2 MHz test condition
2.85 2.95
Dissipation Factor ASTM D150
1 kHz test condition
0.013 0.014
Dissipation Factor ASTM D150
2 MHz test condition
0 0.012
Specific Gravity ASTM D792
@ 23 °C
1.16 1.16


Mechanical Properties XZ Orientation(1)  ZX Orientation(1)
Tensile Properties: ASTM D638
Yield Strength MPa 45 (2) No yield
psi 6,490 (220) No yield
Elongation @ Yield  % 4.26 (0.04) No yield
Strength @ Break MPa  40 (3) 30 (2)
psi 5,860 (440) 4,460 (295)
Elongation @ Break    % 12 (3) 3.1 (1.0)
Modulus (Elastic) GPa 1.69 (0.02) 1.46 (0.02)
ksi 245 (3) 210 (3)
Flexural Properties: ASTM D790, Procedure A
Strength @ Break MPa No break 45 (2)
psi No break 6,770 (325)
Strength @ 5% Strain Mpa 60 (2) -
psi 8,800 (230) -
Strain @ Break % No break 3.1 (0.6)
Modulus Gpa 1.85 (0.04) 1.47 (0.07)
ksi 270 (6) 210 (10)
Compression Properties: ASTM D695
Yield Strength Mpa 75 (5) 160 (30)
psi 10,980 (630) 23,560 (4330)
Modulus Gpa 1.54 (0.03) 1.45 (0.02)
ksi 220 (4) 210 (3)
Impact Properties: ASTM D256, ASTM D4812
Izod, Notched J/m 380 (135) 27 (5)
ft*lb/in 7 (3) 0.5 (0.1)
Izod, Unnotched J/m 1,415 (200) 140 (25)
ft*lb/in 25 (4) 2.6 (0.5)
(1) Values in parentheses are standard deviations

Fused Deposition Modeling (FDM) Technology

Advantages of 3D printing Diran 410MF07 with a Stratasys FDM Machine

Tough long-lasting parts

FDM technology works with engineering-grade thermoplastics to build strong, long-lasting and dimensionally stable parts with the best accuracy and repeatability of any 3D printing technology. Diran 410MF07 parts are tough enough to be used as advanced conceptual models, functional prototypes, manufacturing tools and production parts.

Meet production demands

FDM systems are as versatile and durable as the parts they produce. Advanced FDM 3D Printers boast the largest build envelopes and material capacities in their class, delivering longer, uninterrupted build times, bigger parts and higher quantities than other additive manufacturing systems, delivering high throughput, duty cycles and utilization rates.

Gain new possibilities

FDM 3D Printers streamline processes from design through manufacturing, reducing costs and eliminating traditional barriers along the way. Industries can cut lead times and costs, products turn out better and get to market faster.

Compatible 3D Printers

Stratasys Machines that can print with Diran 410MF07 material

Stratasys F123 Polyjet

Stratasys F123

The Stratasys F123 series combines powerful FDM technology with design to print GrabCAD software for the most versatile and intelligent solution available

Need to 3D print with Diran 410MF07?

Call us free at  1-877-219-6757  to speak to an expert, or send us your CAD model and we'll 3D print it with Diran 410MF07 material